Toyota Vitz Final Engine Vibration Video | ikr คือ | การออกแบบเว็บไซต์ด้วยตนเอง

How do I fix it incase of such problems

All things which you mentioned in your video in my vitz 2012 all of them are perfect my mechanic says need ko change acceleration pedal. Will this work if i change the pedal. I changed coils spark plugs throttle cleaning injectors are perfect spark plugs are perfect still i have bad vibration in the car. When the car is cool there is no vibration.when the car become hot it starts vibration 😭

what was ur car issue my car has exactly same thing no scan issue

Clean the EGR valve.

want to tell you that my car was parked up for 2 weeks untill today. Crazy misfiring and no power. Turns out cylinder 3 had a cracked spark plug, and number 2 and 3 coil packs where not firing as they should. Number 1 was firing real loud and you could see the spark from the gap with the engine running while lifting each coil pack. So out here them selling 1 Coil Pack for $6,500 up to $14,000 for one!! So turned to my trusty eBay and found 3 with my part number 90919-02239 for 1 KR-FE 2010 Toyota Vitz for USD$57!! and that's for 3!! And customs only charged me JMD$2,500 to clear dem. After a slight USPS delay mi finally got them today. Rush home and installed them and went for a test drive to find that power had returned but the car was shaking like crazy. Opened the bonnet and the engine was shaking well hard. Now mine you during the 2 weeks downtime cleaned the throttle body, PCV valve, MAF sensors…all the little things that would make it operate better. So mi seh to miself no man, mek mi disconnect the battery and reset the ECU, because the computer may nuh get used to the new coil pack dem yet. Plug off the battery, turn on lights to drain all power from the car, then reconnected the battery and Bam! Car start idle smoothly again.